ɫլҹӰվ

  • Integral Waterproofing & Durability Solutions
  • Contact Us

It is officially winter and it came early this year. For me, winter officially starts when I receive that first customer complaint of the season about set retardation. “Your product is causing my concrete to be retarded!” they say.

Insert politically incorrect response here about who or what might be retarded.

Okay, I don’t actually say politically incorrect things like that – but that’s often what I’m thinking. Strangely enough, these customers have used our product all summer long and not experienced any set retardation at all. Then a little cold weather comes along and suddenly “our product” is causing an unacceptable set delay. Worse still, I sometimes find myself reminding the customer that we already had this very same conversation – about a year ago.

Actually, a little bit of set delay is good for concrete. With lower heat of hydration and longer hydration times you will generally find that you get better, stronger concrete. Of course you must usually adjust your finishing and/or form stripping schedule to compensate. The real problems start when the temperature falls very low. Not only can setting times can become extreme, but if the concrete is allowed to freeze then it will ultimately lose about 50% of its final strength.

There are many factors that can contribute to set delay. Many common admixtures have a set retarding effect to some degree. The use of fly ash, slag and other supplementary cementing materials will slow hydration times. Even the addition of extra water will extend your setting time. But by far the biggest factor is temperature. For every drop in temperature of 10 C (20oF), you can expect your concrete’s setting time to double. Even readers who work in hot climates should note that the preceding list of factors applies to you too..

ճ publishes a document titled . This comprehensive document is an excellent guide to successfully completing concrete work in cold temperatures. ճpublishes their own cold weather document titled . While many might find that they can’t be bothered to read the ACI document, the NRMCA document is an absolute must read – especially since it is just 2 pages long, it’s free and it hits all the really important points you need to be aware of when placing concrete in cold weather.

It comes down to simply being aware of cold conditions and planning adequately in order to deal with them. Thanks for reading and please feel free to post any comments, tips or additional references.

Related News

  • Concrete Waterproofing

    Can anything really be waterproof?

    Written by: Kevin Yuers

    Traditionally, waterproofing of concrete structures has been accomplished using a membrane of some sort. The membrane can be anything from...

    Read More
  • Concrete Waterproofing

    What does waterproof mean?

    Written by: Kevin Yuers

    What does it mean to be “waterproof”? Can anything really be truly waterproof? I’m not speaking philosophically. The question is...

    Read More
  • Concrete Waterproofing
    ɫլҹӰվ's logo consists of a yellow diamond behind a gray webbed globe that has the name "ɫլҹӰվ" over top of it.

    Why waterproofing with surface membranes is obsolete thinking

    Written by: Kevin Yuers

    A local issue making headlines in Vancouver is the destruction of the gardens above Robson Square in the heart of...

    Read More
  • Concrete Waterproofing
    ɫլҹӰվ's logo consists of a yellow diamond behind a gray webbed globe that has the name "ɫլҹӰվ" over top of it.

    4 Concrete Waterproofing Solutions for Urban Structures

    Written by: Alex Emlyn

    ɫլҹӰվ’s waterproofing products solve a variety of challenges for diverse structures around the world. Below is a run-down of recent...

    Read More